Honda issues

Common Honda Issues

in Uncategorized, Maintenanceby Chris

Honda Odysseys consistently top the National Transportation Safety Board’s list for the safest cars in the country. You can keep your own Honda Odyssey on the road by knowing what these issues are. Lastly, you can keep your car on the road by knowing how you can get them repaired quickly.

Problems with the Exterior Lighting

One of the most common issues reported with all years of the Honda Odyssey involves those with the van’s exterior lighting. In particular, many owners report that their vans’ corner and bumper lamps fail to illuminate correctly. When they are driving their vans, owners say the lamps do not provide sufficient lighting to see the road ahead of them.

The poor lighting from the corner and bumper lamps put owners of Honda Odysseys at an increased risk of being in a car accident at nighttime. If you notice your Odyssey failing to put out enough light, you’ll need to take it to an experienced Odyssey repair technician. They may be able to replace either the bulbs or fuses in the lamps.

Frozen Windshield Wiper and Washer Rods

Another commonly reported with Odysseys involves the freezing of the windshield wiper and washer rods. The front windshield wiper blades on the van can become frozen to the windshield. When this happens, the linkage rods can easily become bent or separated from the motor.

If this occurs, drivers of Odysseys cannot clear their windshields during rain or snow. If driving at night or in poor conditions, your risk of being in an accident is higher. Have the windshield wiper and washer rods on your Odyssey have become frozen or damaged? Have an experienced mechanic replace the front wiper rod immediately.

Middle and Rear Outboard Seating Displacement

Problems in the 2011 and newer Honda Odysseys have been reported with the vans’ middle and rear outboard seating. The seats can become displaced when they are being maneuvered into one of the two available positions for them. If they become displaced, people in them could become injured when the driver of the van brakes suddenly.

To repair displaced outboard seating in the middle or rear rows of the van, you will need to have a Honda Odyssey repair technician put in a new bracket. The bracket will prevent the seats from sliding out of position and also hold them in place securely when the driver applies the brakes.

Dangers with the Front Underhood Electrical Wiring

Some of the newer models of the Honda Odyssey have problems with the electrical wiring under the front underhood. The wire harness that is located in the engine compartment could be severely damaged if it comes into contact with metal pipes. This contact could result in a fuse being blown in the compartment.

Once a fuse is blown, the power to the engine or any system that relies on electrical power could be lost. This includes the power to the lights, horn, windshield wipers, and antilock brakes. Depending on the system that loses power, the driver of the van may not be able to control the car and could be involved in a serious accident.

Fixing this issue involves putting a protective covering over the wire harness and metal pipe in the underhood. Repairs of faulty wires in this part of the engine are important to check off the list. You can have these repairs made by a licensed Odyssey mechanic.

Failure of the Ignition Switch

There are reports of problems with the engine’s ignition switch in models as recent as 2018. The electrical contacts in the ignition switch become faulty because of high electrical currents passing through them when the vehicle starts.

If this damage occurs, the engine in the van could stall unexpectedly. In worst-case scenarios, it could lead to a serious car accident.

An experienced mechanic will know how to replace the faulty ignition switch in your Honda Odyssey. You should make this repair immediately to avoid the risk of being in an accident.

These issues are common by drivers of Honda Odyssey vans. Take your Odyssey into a mechanic who will help you with your auto repairs. Lastly, Cloverdale Auto Service is the Best in Winston Salem, NC.

car

Tips to Keep Your Car Running at Its Best

in Blog, Car Tips, Uncategorizedby Chris

If you want to keep your car running like new for as long as possible, you are likely wondering what steps you should take to reach your goal. Having a few things in mind and keeping up with standard maintenance can do wonders for any car, and you will be pleased with the outcome. You can avoid many costly repair fees and let your car consume as little fuel as possible, saving you money in transportation costs. A well-maintained car will run properly and be there for you when you need it the most, and this guide shows you where to begin.

Change the Oil

An adequate supply of clean oil is important for the smooth operation of your vehicle. Oil allows the parts of your engine to work together and do their job without stress that could cause damage. Your engine will keep you moving as long as you don’t forget to change your oil on a regular basis. Engines with low or dirty oil encounter friction that can damage vital components before long, a mistake nobody would want to make. In most cases, you can do well by changing your oil every 3,000 miles under normal driving conditions.

Check Transmission Fluid

Transmission fluid lets your engines switch gears so that you can have the power you need to drive down the road. Of all the things that could go wrong with a car, the transmission is one of the most expensive. Make sure your transmission is in top shape unless you want to shell out the cash for the repairs. One of the most important things you can do is keeping your transmission fluid level where it should be. If you don’t know how to check the transmission fluid, ask the staff to do it the next time you change your oil.

Suspension System

Making up your suspension system, your struts, springs, shocks and tires are critical for keeping your car on the road and you in control. If your suspension system runs into problems along the way and you fail to address it, you could find yourself facing other issues.

For example, those who don’t fix suspension problems could notice uneven tire wear, which could cause the tire to go flat or burst. Look in your owner’s manual to see how often you should replace your suspension if you don’t want to end up in a bad position, and you will save yourself a lot of money over the long run.

Final Thoughts

Getting the most from your car is not hard but requires you to keep up with routine maintenance. Putting in a little effort can take you far when your mission is to keep your car on the road for years to come. Even if you don’t plan to keep the same car forever, taking care of it now improves the resell value in the future.

Changing the oil on time and keeping up with other issues is a smart move you don’t want to overlook if you care about the performance of your car. The tips you have learned empower you to reduce the odds of breakdowns and other problems.

Cloverdale Auto Service is the Best in Winston Salem, NC when it comes to Auto Repair.

 

OUR SERVICE COMMITMENT:

Our commitment to you is to provide timely and consistent automotive services with integrity, quality, and value. We ensure that each and every client experiences the highest standard of customer assistance and satisfaction. Our experienced staff of highly skilled technicians and customer service representatives provides professional service in a relaxed, clean and friendly environment. We feel comfortable saying that once you try our service you won’t go anywhere else. (If you feel like your mechanic is practicing at your expense or you’re not quite sure that you trust them, it’s time to see us!)

Gas Efficient

More Money in Your Pocket by Reducing Gas Consumption

in Blog, Car Tips, Uncategorizedby Chris

With the cost of living on the rise, most of us are looking for creative ways to cut spending and save money. You can reach that goal by keeping a few tips in mind to save money on fuel each week, and you will smile when you notice the difference. The way you drive and treat your car impacts the amount of gas you use, so making a few small changes can do wonders to keep even more money in your pocket. Some people overlook these tips because they can only save a dollar or two, but each dollar you save adds up over time.

Go Easy on the Gas

If you are like many other people, you have a busy life that does not give you a lot of time to relax and unwind, so you want to get to your destination as quickly as you can. You step on the gas and push your car to give you a fast acceleration without thinking about it. The problem, though, is that putting the pedal to the floor uses much more gas than a gentle acceleration. Accelerating slowly gives your car time to change gears before hitting high speeds, and your wallet will thank you.

Go Easy on the Breaks

Many people wait until the last minute to put on the breaks at stop signs and traffic lights. If you do the same thing, you should know that you are using much more fuel than you need. Keeping your car at full speed as you approach a stop sign is a waste of forwarding energy since you will be stopping anyway. While it might not seem like much, if you waste several hundred feet of movement each time you stop, the costs can rise faster than you suspect. Ease off the gas and come to a slow, gentle stop.

Change Your Air Filter

Your engine needs plenty of fresh air to run well and keep you on the road, and it can’t suck up dirt and other contaminants. Your air filter removes impurities from the air before they have time to enter your engine, but air filters get clogged over time. A dirty air filter restricts airflow and makes it much harder for your engine to do its job. You will then pay much more in gas than you need. With that in mind, a new air filter is one of the top investments you can make as far as fuel economy is concerned.

Final Thoughts

Too many people waste more gas than they know because they are not aware of the tips you have just learned. If you don’t want to overpay at the pump, taking care of your car and paying attention to the way you drive lets you reach your goal without much effort. Some people are stunned to see how much fuel they can save over a month or two, and you will likely feel the same way if you have never used these fuel-saving tips.

OUR SERVICE COMMITMENT:

Our commitment to you is to provide timely and consistent automotive services with integrity, quality, and value. We ensure that each and every client experiences the highest standard of customer assistance and satisfaction. Our experienced staff of highly skilled technicians and customer service representatives provides professional service in a relaxed, clean and friendly environment. We feel comfortable saying that once you try our service you won’t go anywhere else. (If you feel like your mechanic is practicing at your expense or you’re not quite sure that you trust them, it’s time to see us!)

oil change

Signs Your Vehicle Need An Oil Change

in Maintenance, Uncategorizedby Chris

It is important to have your oil changed on a regular basis. Regular oil changes will keep your car functioning at its peak. They will also help you improve your gas mileage. Many people wait too long to get it changed because they do not recognize the signs. There are a number of things that indicate it is time for an oil change.

Dirty and Dark Oil

If oil is clean, then it will have an amber color. Oil has a tendency to darken when it gets dirty. The only way that you will know that the color has started to change is by checking the oil every month. If the oil is dark and thick, then it is time for you to get it changed.

Engine Noise

Oil helps lubricate the engine parts. This allows them to move without any friction. Oil loses the ability to lubricate the parts over time. That is why you will start to notice the rattling, rumbling or knocking if it is time for you to get it changed.

The Check Engine Light is On

If your oil is low, then you will notice that the oil change light is on. You should check the oil as soon as you notice the oil change light turns on. If your check engine light is on, then this could be another sign that it is time to get your oil changed. It may also be an indication that the engine is damaged.

Exhaust Smoke

It is normal for some smoke to come out of the tailgate. You may notice this when the weather is cold. However, if you notice a lot of smoke coming out of the exhaust, then it is time for you to get an oil change. This could also indicate that your oil is leaking.

There is an Oil Smell

If you smell oil, then you will likely need to get an oil change. You may also notice the smell of exhaust or gas. Additionally, you may notice an oil smell if the vehicle is overheating. This is dangerous. A fire can result if your engine overheats. That is why it is important to get an oil change as soon as possible if you notice a smell.

Rough Idle

Your car may rattle and vibrate when you are stopped at a red light if your oil needs to be changed. If the oil is dirty, then it will not be able to lubricate the parts properly. The engine will rumble as a result of this.

Sluggish Acceleration

Your car will not be able to accelerate properly if the oil is dirty. If your car does not have as much power as it used to, then it is likely time for you to get an oil changed.

Ticking Sounds When the Car Starts

When you turn on your car, the engine will start circulating oil. If the oil is too thick, then this will take longer than it has to. That is why you may notice a ticking sound. This noise occurs because the valves are trying to move the oil.

Excessive Mileage

You may not notice any of the aforementioned signs. However, it may still be time for an oil change. Mechanics generally recommend that people get their oil changed every three months or every 3,000 miles. If you have a new vehicle, then you may be able to wait until you have driven 6,000 miles or every six months.

It is important to note that these recommendations are general guidelines. That is why it is a good idea to check your owner’s manual before you get an oil change. The owner’s manual will also be able to tell you about other maintenance that you will need to get for your car.

Not only will an oil change keep your vehicle running at its peak but it will also prevent your car from breaking down. An oil change can help you save a lot of money in the long run. It is important for you to discuss the needs of your vehicle when you come in for an oil change. Your technician will also be able to tell you about how often you need to get an oil change.

Mercedes-Benz

Common Mercedes-Benz Mechanical Issues

in Mercedes-Benz, Uncategorizedby Chris

Mercedes-Benz is a brand that is synonymous with luxury and quality. Even so, cars made by this company can sometimes fall victim to common mechanical issues. You can keep your Mercedes in great running condition by knowing what challenges to watch out for while you are driving it.

Engine Not Starting

One of the most common problems that all models of Mercedes cars have is not starting. The engine will crank, but the car will not start as expected.

This problem is caused when the crankshaft piston starter fails to send a TDC or Top Dead Center signal to the car’s engine. Without that signal, the engine does not fire even though it cranks. The sensor failure also leads to prolonged cranking times when you are trying to start your vehicle.

You can remedy this common issue by having your Mercedes crankshaft piston starter inspected and repaired as needed. We have the experience and skills required to fix all classes of Mercedes-Benz vehicles.

Failing to Shift from Park

Another problem that is common in the E and S-class Mercedes-Benz vehicles is the gear shift failing to shift from park. Your car’s engine may start and run like normal. However, you cannot shift the gears from park to reverse or drive.

This problem arises whenever the selector module fails. If you begin to experience troubles shifting from park into other gear positions, you should bring your Mercedes-Benz to a licensed and skilled mechanic. The mechanic can inspect and fix the selector module so your gears do not get stuck in the park position.

Ignition Misfires

Mercedes cars can often be plagued by ignition misfires. This is an issue that needs to be addressed immediately to avoid prolonged damage. Whenever your ignition misfires, your car is telling you that there is something seriously wrong with the engine.

You can minimize the likelihood of ignition misfires by changing your ignition coils and spark plugs every 100,000 miles. You can also avoid this issue by having your Mercedes-Benz serviced by our experienced and trained Mercedes-Benz mechanics.

Slipping of the Engine and Transmission Mounts

The engine and transmission mounts in the typical Mercedes-Benz are made out of sturdy solid rubber. This material ensures the engine and transmission remain stable while you are driving the car. It also prevents vibrations from being felt in the passenger area of the car.

When you feel your car kick or jolt whenever you step on the gas, you could take this as a sign that your mounts are slipping or falling. You can prevent this problem by having the mounts diagnosed and replaced every seven years or 80,000 miles. Our Mercedes-Benz mechanics can replace damaged or aging mounts quickly for you.

These common mechanical issues can compromise your ability to drive your Mercedes-Benz safely. You can prevent them by having your car inspected and serviced on a regular basis. You should entrust the inspection, servicing, and repairs of your Mercedes-Benz to mechanics who are trained to work on this brand of vehicles.

 

OUR SERVICE COMMITMENT:

Our commitment to you is to provide timely and consistent automotive services with integrity, quality, and value. We ensure that each and every client experiences the highest standard of customer assistance and satisfaction. Our experienced staff of highly skilled technicians and customer service representatives provides professional service in a relaxed, clean and friendly environment. We feel comfortable saying that once you try our service you won’t go anywhere else. (If you feel like your mechanic is practicing at your expense or you’re not quite sure that you trust them, it’s time to see us!)

brakes

Preventing School Bus Brake Mishaps with Regular Inspection, Maintenance, and Repairs 

in Bus Repair, Uncategorizedby Chris

The brakes on school buses withstand an unprecedented amount of wear and tear each year. These vehicles make repeated stops during their regular routes. They also encounter road conditions that are not conducive to maintaining good brakes.

Are the school buses in your fleet suffer repeated problems with their brakes? It may be time for you to have them serviced by a licensed and trained school bus mechanic. With our professional bus services, you can keep your buses on the road and avoid the biggest mishaps with brakes.

Crumbling Brake Pads

One of the most common problems that school buses encounter while on the road is crumbling brake pads. Brake pads often crumble after they are exposed to de-icing agents used to thaw and treat snowy and icy roads. De-icers like magnesium chloride and calcium chloride eat away at the brake pads until they crumble and wear away completely.

When school buses regularly travel over roads that are treated with these chemicals, it is important to keep an eye on the condition of their brake pads. If you see signs of crumbling, it is crucial for the sake of safety that you have a skilled school bus mechanic replace them immediately.

Uneven Brake Pad Wear

Another common issue with school bus brakes involves unequal or uneven wear and tear. This problem is often caused by calipers hanging up or pin sliders seizing. When it occurs, you lose the performance you need out of your school bus brakes.

However, this issue can be a relatively easy fix as long as you act quickly and get your school bus towed to one of our licensed and ready school bus mechanics. We can replace or repair the calipers or pin sliders and also change out brake pads that have uneven wear and tear on them.

Out-of-adjustment Brakes

When the brakes on your school buses are out of adjustment, they need to be serviced quickly. This problem is often caused by issues like slacks, broken brake components, problems with the actuators, or problems with the drums or hubs. Detecting these causes can be difficult unless you are trained to work on school bus brakes and know where to look to identify the underlying issues.

Our mechanics are trained to handle these problems with out-of-adjustment brakes. They can get them adjusted and replaced if necessary so you can get your school buses back on the road quickly.

Other Common School Bus Brake Issues

School buses can suffer from a variety of other brake issues that include:

  • Cracked or bent brake chambers or camshaft support brackets
  • Hoses with kinks, chafing, and cracks
  • Camshaft heads with flat or worn spots
  • Bearing journals with rust, pitted surfaces, and excessive wear
  • Automatic brake adjusters that are not working properly

Preventing these and other school bus brake issues can be as simple as bringing your school buses to us to inspect, maintain, and repair. Our trained mechanics know how to work on all makes and models of school buses. While your buses are here, our mechanics can:

  • Inspect the condition of the brake lining
  • Examine the rotor plate thickness
  • Check the brake hose flexibility
  • Check and refill brake fluid
  • Replace camshaft bushings and brake shoes
  • Install new brake drums
  • Perform air dryer maintenance at least once a year

These services are crucial to keeping your school buses in safe driving condition. They also help the brakes last longer and avoid some of the more common issues that can cause brakes to wear down and need to be replaced sooner.

The brakes on your school buses can undergo unheard of stress during a regular school year. Depending on the road conditions these vehicles face, they could need their brakes serviced, maintained, and replaced on a frequent basis.

If you want to get the most out of your brakes, it is critical that you entrust their upkeep and repair to mechanics who are trained and licensed to work on school buses. Our school bus brake services are designed to keep your buses as safe as possible throughout the school year.

Audi Check Engine Light

Common Reasons for the Audi Check Engine Light to Illuminate 

in Uncategorized, Car Tipsby Chris

 

The check engine light is the bane of new car drivers everywhere. However, when you own an Audi, you may wonder specifically why this light has illuminated and what it is trying to tell you. You can take the best care of your Audi by learning about the most common reasons for why the check engine light comes on in these vehicles and what you should do about it as the car’s owner.

Loose Gas Cap

One of the most common reasons that an Audi check engine light would come on is simply because the gas cap is loose. If your car does not give you a warning signal of a LOOSE GAS CAP or GAS CAP, it might instead illuminate the check engine light.

When the cause of the light stems from the gas cap being loose, your car most likely will not exhibit any outward symptoms of malfunction like engine misfiring or engine stalling. Still, you should verify that the gas cap is loose and if necessary replace it with one that is specifically designed for your Audi make and model.

Oxygen Sensors

Another common reason for the Audi check engine light to come on involves faulty oxygen sensors. When the oxygen sensors in your car’s engine malfunction, they can trigger the check engine light to illuminate.

In this instance, it can be easy to assume that the light is on because of a loose gas cap. However, you should take your car into a skilled mechanic’s shop and have the codes read for why the Audi check engine light has come on suddenly. If it indicates that the oxygen sensors need to be replaced, you should allow an experienced mechanic to make the repairs for you rather than attempt it yourself.

Ignition Coils or Coil packs

When the ignition coils or coil packs in your engine malfunction, they will trigger the Audi check engine light to illumine. This malfunction will often be accompanied by notable symptoms like the engine shaking or misfiring. These symptoms should alert you to immediately stop driving the car and have it taken to an experienced mechanic’s shop.

Replacing or repairing the ignition coils or coil packs requires intricate knowledge of the Audi engine.

Catalytic Converter

Finally, a faulty catalytic converter can trigger the Audi check engine to come on suddenly and without warning. As with malfunctioning ignition coils or coil packs, a bad catalytic converter can be accompanied by symptoms like shaking or misfiring. You should take these symptoms as hints to stop driving your car and have it serviced immediately.

Repairing a catalytic converter in an Audi can be a complex job. It is crucial that you allow an experienced Audi mechanic to make this repair for you rather than attempt it on your own.

Check Engine Light

These issues are some of the most common for why the check engine light may come on while you are driving your Audi. Many times, the light will illuminate even if your car does not exhibit any symptoms.

Because your car seems to be driving fine, it can be tempting to ignore the light and assume that it will go off on its own. It is true that if the cause stems from a faulty gas cap, the light will reset itself and go off two to three days after you tighten or replace the cap. Otherwise, the light will remain illuminated until you have the codes read on your Audi and you figure out why the light came on in the first place.

Regardless of why your Audi check engine light came on in your , it is crucial that you do not ignore it. You also should resist driving your car for a prolonged period of time even if it does not exhibit any symptoms. You should allow a skilled mechanic to read the codes on the engine and make the recommended repairs immediately.

More about the Check Engine Light

If the Audi check engine light comes on or starts flashing while your car exhibits symptoms like engine misfiring or shaking, it is critical that you stop driving it immediately and instead have it towed rather than driven to a mechanic’s shop. A flashing check engine light indicates that something is seriously wrong with your engine. You should never drive your Audi while the check engine light is flashing.

The Audi check engine light tells you that something is amiss with your vehicle. You may be tempted to ignore it. However, you should have the engine codes read and the car repaired by a mechanic who is experienced in working on all types of Audi makes and models.

Mercedes-Benz

Five Facts You Did Not Know About Mercedes-Benz 

in Mercedes-Benz, Uncategorizedby Chris

 

Founded in 1886, Mercedes-Benz is a brand that is associated with the utmost in automobile luxury and class. The company’s founder, Karl Benz, received the financing to start this now renowned international car company from his wife Bertha. The brand has flourished into one of the most recognizable in the global auto industry.

As storied as Mercedes-Benz is, it still possesses secrets and little-known facts that amaze people who are fans of the company and its automobiles. You may become more of a fan yourself by learning about five facts you did not know about Mercedes-Benz.

Stringent Inspections 

One of the most well-kept secrets of Mercedes-Benz is the fact that the company hires a slew of inspectors to closely scrutinize every detail of every car that it makes. In fact, there is one inspector for every 11 production workers in every Mercedes-Benz factory around the world.

The inspector assigned to the 11 workers under his or her stead is paid to look closely for any sign of defects or damages before the car comes off the production line. By the time each car is finished and ready to be shipped out to a dealership, it will have undergone literally thousands of inspections to guarantee its quality and luxury.

The Use of Welding 

Another relatively unknown fact about Mercedes-Benz vehicles is that the company uses only welding rather than bolts in the creation of its cars. Each car will have been welded in over 10,000 different places before it reaches the end of the production line.

The avoidance of using bolts spares this brand’s vehicles from disrepair and deterioration due to bolts coming loose as found in other brands’ vehicles. Welding also helps the vehicles avoid signs of aging like squeaking, rattling, and groaning that can come with the use of bolts.

Hand Grinding

After a Mercedes-Benz vehicle is welded in over 10,000 different places on its body, it then undergoes extensive grinding by hand. Vital seams located on and inside of the vehicle are ground by hand and then repeatedly packed with pewter.

After the seams are packed with pewter, they are again ground down by hand until they are no longer distinguishable. This hand-grinding guarantees a high level of workmanship and close attention to detail.

The Three-point Logo

Mercedes-Benz’s three-point logo is well-known around the world. People associate the three-point logo with this brand as well as the luxury, class, and price found with the vehicles made by the company.

The three points of the logo stand for land, water, and air. In 1909, however, company leaders registered a four-point logo for Mercedes-Benz with the fourth point standing for space. In fact, these cars actually created a spaceship, albeit it one that did not work and could not fly.

Nonetheless, the four-point logo was vetoed in favor of the three-point one that is so well-known today. The four-point logo did make an appearance in the comedy movie Spaceballs, however. It was mounted on the hood of the spaceship used by that movie’s Princess Leah. The spaceship in the movie was a Mercedes-Benz SEL limited-edition vehicle.

Pope mobiles 

Finally, Mercedes-Benz garners worldwide attention for having made numerous vehicles for the pope and the Holy See. These vehicles, which are now dubbed Pope mobiles, are used exclusively by the pope and owned by the Holy See itself.

The first Pope mobile that car was made was a Nurburg 460, which was accepted and used by Pope Pius XI in 1930. The company also made a Mercedes-Benz 230G in 1980 for the pope. This vehicle became instantly recognizable for its transparent carriage in which the pope sits as he is driven among the crowds who come to see him.

The most recent Pope mobile made by Mercedes-Benz was an ML 430 with special bodywork. This vehicle was crafted especially for Pope John Paul II for World Youth Day. It featured a V8 engine with a displacement of 4.3 liters and had an output of 272 horsepower.

These five little known facts about Mercedes Benz solidify its reputation as a maker of high-class luxury vehicles. The brand continues to enjoy a favorable impression with car fans around the world.

Sources:

https://www.uniquecarsandparts.com.au/mercedes_benz_25_revealing_facts
https://www.msn.com/en-in/autos/photos/20-surprising-facts-about-mercedes-benz/ss-AApTY0Q#image=19
http://media.daimler.com/marsMediaSite/en/instance/ko/2002–Mercedes-Benz-ML-430-with-special-bodywork.xhtml?oid=9361438

Lastly, we look forward to servicing your vehicle here at Cloverdale Auto Services.  We are located at 1418 South Stratford Road Suite C Winston-Salem NC 27103.

Mechanical Issues

Common Mechanical Issues in School Buses

in Bus Repair, Uncategorizedby Chris

The children in your school district count on you to take them to and from school each day. However, fulfilling this obligation can be a challenge if your school buses continuously face mechanical issues. You can prepare for an uneventful school year now by knowing what common problems school buses tend to suffer from and how they can be addressed quickly.

Mechanical Issues: Brake Issues 

With all of the stops that school buses have to make, it is little wonder that their brakes are often the first components to wear out during a typical school year. The dozens of stops while in route to pick up and drop off school children puts a strain on the brake’s pads, bearings, and other parts.

Symptoms like squealing, scraping, or grinding indicate it is time to have the brakes on a bus replaced or repaired. You can head off brake problems with your school buses by having them inspected and serviced on a regular basis, and check this off your mechanical issues list.

Mechanical Issues: Engine Overheating

Buses have powerful engines. However, their size and power do not make them immune to challenges like overheating.

When the gauge needle on the bus’s dashboard creeps toward the red zone, it is time to have the engine inspected and repaired if needed. The fix might involve replacing a radiator hose or flushing out the radiator, for example. It also could involve more in-depth work like having the thermostat replaced.

You cannot afford to have a bus out of commission because of overheating issues. You can avoid this problem by having a skilled bus mechanic inspect and service your bus engine every two to three months.

Mechanical Issues: Dead Batteries 

Nothing is more frustrating for a dedicated bus driver than to find his or her bus with a dead battery. A dead battery takes that bus out of service for the day and also could mean the driver does not get to earn a day’s wages.

When the battery dies in one of your buses, you can get it replaced quickly by taking the bus to an experienced bus mechanic. You can also make sure batteries are viable and replaced in time by allowing the mechanic to regularly test them for you.

The school children in your district count on reliable buses to take them to and from school during the week. You can keep your routes on track and avoid expensive and difficult bus mechanical issues by having your fleet of school buses serviced by a professional bus mechanic.

 

OUR SERVICE COMMITMENT:

Our commitment to you is to provide timely and consistent automotive services with integrity, quality, and value. We ensure that each and every client experiences the highest standard of customer assistance and satisfaction. Our experienced staff of highly skilled technicians and customer service representatives provides professional service in a relaxed, clean and friendly environment. We feel comfortable saying that once you try our service you won’t go anywhere else. (If you feel like your mechanic is practicing at your expense or you’re not quite sure that you trust them, it’s time to see us!)

 

OUR MISSION STATEMENT:

Hi, my name is Karen Kratz and for many years now my staff and I have provided excellent maintenance and auto repair services for a variety of cars and trucks in Winston Salem. It’s our goal to be the very best at what we do. At Cloverdale Auto Service we are committed to taking care of our customers in the same manner we care for our families and friends. That means providing you with the highest quality of service that will ensure safe and reliable transportation.

Used Lexus

Thinking About Buying a Used Lexus?

in Blog, Lexus Repair, Uncategorizedby Chris

Here Are The Most Common Issues To Be Aware Of If Purchasing A Used Lexus…

Lexus is a brand that is synonymous with class and luxury. Cars made by this company typically retain their beauty and value for years. Like most vehicles however, a Lexus can be prone to mechanical and cosmetic issues as it ages. You should be aware of these challenges before you decide whether or not to buy a used Lexus for yourself.

Used Lexus

→ Drive Train Issues…

Lexus offers a 48-month, 50,000 drive train warranty on all of its new vehicles. If a mechanical issue occurs with the drive train within that time or mile span, the manufacturer will typically pay for the cost of its repair.

It is highly possible the manufacturer warranty is no longer applicable on the used Lexus you are considering. If not, it’s important to know one of the most commonly reported drive train issues. A significant number of owners of used automatic drive train Lexus vehicles have observed that their check engine lights come on suddenly while driving.

The most common engine code for this occurrence is P0751, which could indicate dirty or low transmission fluid. As well as, PO714 code, which indicates a problem with the transmission fluid temperature sensor circuit. And lastly, trouble code PO894, which indicates a problem with the transmission component slipping.

 

→ Oil Leaking From The Timing Chain Cover…

Another commonly reported issue with all makes and models of used Lexus vehicles involves oil leaking from the timing chain cover. Many people who reported this issue indicated that it started when their vehicles reached 80,000 miles.

The issue is one of the more costly problems to repair. The base line estimate for repairs for this issue can be upwards of $4000 in some instances.

However, you can avoid this costly repair by servicing the gaskets on your used Lexus often. You should take your car to a trained knowledgeable mechanic experienced in working on Lexus vehicles, such as Cloverdale Auto. can help your car avoid having an oil leak from the timing chain cover and other places within the engine.

 

→ Water Leaking From The Cabin…

When you drive your used Lexus, you expect the cabin of the vehicle to protect you from the elements outside. However, some used Lexus vehicles have reports of having leaky cabins. So much so, that water from the outside can easily make its way into the car’s interior.

People who have reported issues with water leaking into the cabin. It is important to note that this problem began when their cars reached 20,000 to 30,000 miles. The repair for the issue is not as budget-friendly as other repairs with the basic cost starting at around $2300 according to online reviews.

This problem typically occurs because of defects or damages to the tubes around the sunroof. Before you buy a used Lexus, take it in to a professional to inspect and service the sunroof.

 

→ The Throttle May Stick Under The Floor Mat…

Another common issue with some models of Lexus cars involves the throttle getting stuck under the floor mat. This issue, according to reports made by verified pre-owned Lexus owners, occurs when the car reaches around 20,000 miles. People who have made reports about this issue say that it cost them around $1500 to repair it.

The best way to avoid buying a used Lexus with a troublesome throttle would be to have it inspected by a skilled mechanic before complete the transaction. Likewise, you can have the issue repaired quickly. Simply take your used Lexus to a mechanic who is certified and experienced in working on Lexus vehicles.

 

→ Melting Dashboard…

Finally, one of the biggest complaints among used Lexus owners involves the dashboards of their vehicles melting during the summertime. Lexus recently settled a class action lawsuit with owners regarding this issue.

The company offered to repair or replace the defective dashboards at no cost to the owners. With this said, be certain to inquire if the dashboard has already been replaced.

A used Lexus can be a good investment for you and your loved ones. These cars typically retain their value and are well known for their performance and durability. However, there are some common mechanical issues you need to be aware of if you are considering buying a used Lexus.